MS Agarwal Foundries Pvt. Ltd is using proficient manpower, best quality of raw material, most advanced & sophisticated technology to produce our brand steels. Rebars & Billets, what we are manufacturing are BIS registered and are strictly as per IS 1786 & IS 2830 standards respectively.

We are manufacturing the following products in our integrated steel plants:-

• Sponge Iron,
• MS Billets,
• TMT Bars,
• Cut & Bend
• Corrosion Resistance Steel
• MS Round Bars

Advantage of Manufacturing Sponge Iron

• In-house raw material to manufacture billets
• Total control on the chemical composition of the Steel while manufacturing Billets and then TMT bars
• Complete quality assurance
• Consistent and top class quality leading to customer delight and increased trust

“Technology & Innovation are key to Improvement”.
“Excellence is never a Miracle, Luck or Chance, It is always the result of high intention sincere efforts and intelligent execution”.

MS Agarwal Foundries Pvt Ltd has been granted License rights to use the Thermex Quenching System and Technology of M/s Hennigsdorfer Stahl Engineering Gmbh, Germany to produce High Strength Thermex Quenched and Self Tempered (QST) rebars as per IS 1786 Standards.

“When we strive to become better than we are, everything around us becomes better too”.

The QST technology involves rapid quenching of hot bars through a series of water jets after the bars come out of the last rolling mill stand. Air and water pressure is automatically controlled, based on the size, speed and temperature of the rod. This treatment converts the bar outer surface to a hardened structure. The subsequent phase involves cooling at ambient temperature to allow the hot core to temper the surface through thermal exchange, which results in a unique structure of tempered marten site in the peripheral zone and a fine grain of ferrite pearlite at central zone and finally the results is a world-class QST rebar.

• Standard Organization: Our organization is ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007, BIS 2830:1992 Carbon Steel Cast Billet, BIS 432 Part-I (MS Round bar), BIS1786:2008 TMT/HYSD BARS as perFe415, Fe415D, Fe-500, Fe500D, Fe550, Fe 550D, Fe-600 certified company and the products what we are manufacturing are as per BIS norms. This clearly speaks about our documentation and quality standards.
• We are very glad and with great pride wish to inform that recently AF Star have been accorded the approval from RDSO (Research Development & Standard Organization) for the supply of steel to Indian Railways, very few TMT manufacturing companies have got this very prestigious & dignified opportunity to set associated with Indian Railways as on date we are one among in South India.
• AF Star have also been recognized with various NHAI (National Highways Authority of India)&MORTH (Ministry of Road Transport and Highways) roads projects on regular basis.
• Integrated steel plant: We are the only company in Telanganain private steel manufacturers, which has fully integrated manufacturing facilities under one roof. This gives us total control over the chemical & physical composition of the material.
• Quality Control: Our Steel rebars have consistent Mechanical and Chemical properties as we are using virgin steel from mines, killed steel before casting and rolled with superior technology. Strong quality control ensures that each batch run product comes with the same trust & quality.
• Casting of Billets:We bring the Iron ore from Karnataka and Coal from South Africa and produce the sponge iron for caged consumption. Qualities of bars mostly depend on the type of material used for making the Ingot/ billets. We use only Sponge Iron for producing billets. Hence we are achieving the best quality of steel.
• Virgin Steel: We use the in-house Sponge Iron in the Induction furnace and cast the billet by Concasttechnology. Many mills use only Ingot instead of Billets to produce the bars. The quality of bars largely depends on quality of input to the mill (i.e. Ingot or Billets). Bars made from Billets have superior strength and elongation.
• Killed Steel:Our Steel has Low Carbon Content & made from fully killed steel.
• Rib Pattern: The rib pattern is specially designed to ensure excellent bond between the bar and the adjoining concrete.
• Physical Properties:Our Bars have Higher Yield strength & Ultimate Tensile Strength coupled with higher percentage Elongation.
• Thermal stability:Our steel bars have high thermal stability compared to Tor steel / CTD rebars. They are the preferred choice as there is no loss of strength even at elevated temperature (400-600 Degree C)
• Seismic Resistant: Our bars have the ability to absorb shocks and have good resistance to earthquakes.
• Corrosion Resistant Steel (CRS): Our bars are highly corrosion resistant and is best suitable for even Humid and costal area as we use thermo mechanical treatment using German Technology.

MS Agarwal Foundries Pvt. Ltd always uphold its position as a leader in manufacturing TMT steel bars by conducting all its operations in a manner that is protective to the environment, health & safety of employees, interested parties and the community.
In Fulfillment of this commitment, we shall:

“There is no better policy in the society than pursuing health and safety of its people”.

• Comply with applicable safety, health & environment laws & regulations.
• Work towards preventing all workplace related ill-health and injury.
• Enhance Safety, Health & Environment (SHE) awareness among stake-holders through effective communication and training.
• Continually improve all our processes in OH&S (Occupational health & safety) management & performance.
• Integrate SHE considerations into business planning and decision making.
• Encourage SHE responsibility among our employees in their practices and promote their involvement in achieving the goals of this policy.